ColibriNANO USB SDR Receiver 0.1 to 55 MHz
$450.00 INCL. GST
*** PLEASE NOTE ***
ColibriNANO is not in currently in stock – ACCEPTING PRE-ORDERS NOW for Estimated delivery END OF OCTOBER 2020.
ColibriNANO USB SDR Receiver 0.1 to 55 MHz
ColibriNano takes USB dongle SDR receivers to a new level.
This is a direct sampling, high quality SDR receiver covering 100 kHz to 55 MHz with up to 3 MHz sample rate in a sturdy aluminium USB stick.
The ColibriNANO opens new horizons for HF band enthusiasts, thanks to its 14-bit ADC, which provides a ~110 dB BDR and up to 3 MHz sample rate. A 0.5 ppm local oscillator gives the ColibriNANO a great frequency stability.
Using the ColibriNANO remotely, located in a rural area will let you receive weak signals otherwise impossible to hear in the noise. Remote control your Colibri NANO from anywhere over the internet using our RPI server
The ColibriNANO operated by ExpertSDR2 software and compatible with popular HAM software such as HDSDR, SDRSharp via the ExtIO library.
Available on backorder
*** PLEASE NOTE ***
ColibriNANO is not in currently in stock - ACCEPTING PRE-ORDERS NOW for Estimated delivery END OF OCTOBER 2020.
ColibriNANO USB SDR Receiver 0.1 to 55 MHz
ColibriNano takes USB dongle SDR receivers to a new level.
This is a direct sampling, high quality SDR receiver covering 100 kHz to 55 MHz with up to 3 MHz sample rate in a sturdy aluminium USB stick.
The ColibriNANO opens new horizons for HF band enthusiasts, thanks to its 14-bit ADC, which provides a ~110 dB BDR and up to 3 MHz sample rate. A 0.5 ppm local oscillator gives the ColibriNANO a great frequency stability.
Using the ColibriNANO remotely, located in a rural area will let you receive weak signals otherwise impossible to hear in the noise. Remote control your Colibri NANO from anywhere over the internet using our RPI server
The ColibriNANO operated by ExpertSDR2 software and compatible with popular HAM software such as HDSDR, SDRSharp via the ExtIO library.
ColibriNANO Specifications
| RF ADC, bit @ MHz | 14 @ 122.88 |
| ADC type | ADS4145 |
| RX Frequency range, MHz | 0.1…55 |
| Undersampling, MHz | 0.1…500 |
| Independent software receivers | 1 + 1 SubRX |
| Sample rate, kHz @ bit | 48; 96; 192; 384; 768 @ 24 1536; 1920; 2560; 3072 @ 16 |
| Bandscope, MHz | – |
| RX HF filters, MHz | LPF: 55 |
| Noise floor, dBm | 1.9 MHz (160M) – 131 7.1 MHz (40M) – 130 52.5 MHz (6M) – 127 |
| NPR (Noise Power Ratio) with Noise Bandwidth 5 MHz, dB | 59 |
| BDR on HF, dB | 110 |
| BDR on VHF, dB | n/s |
| Sensitivity, uV | 0.35 |
| DR IMD3, not less dB | 95 |
| RMDR, dB | 104 |
| ATT/Preamp, dB | from -31.5 to +6, with 0.5 step |
| Local oscillator TCXO, MHz +/- ppm | 122.88 +/- 0.5 |
| Built-in audio codec, bit | – |
| RF input with up to 15 kV ESD protection | 1 SMA connector |
| Maximum antenna input voltage, without ADC overload, mV (ATT=0 dB) | 74 (Pk-Pk); 32.7 (RMS) |
| PC interface | USB 2.0 |
| DC voltage range, V | 4.5…5.5 |
| Current consumption, A | 0.41 |
| Power consumption, W | 2.02 |
| Operating temperature, °C/°F | 0…+50/ +32…+122 |
| Active device temperature, °C | +45…+50 |
| Dimensions L x W x H, cm/inches | 9.0 x 2.5 x 1.7/ 3.54 x 0.98 x 0.67 |
| Weight, kg/lbs | 43 gr/ 1.52 oz |
